Includes:

• Remove old tire.
• Clean wheel (Provided it is not completely covered in caked on road grime).
• Grease wheel bearings and seals (Preventative Maintenance)
• Install new tire.
• Balance assembly.

Includes:

• Remove wheel from vehicle.
• Remove old tire.
• Clean wheel (Provided it is not completely covered in caked on road grime).
• Grease wheel bearings and seals (Preventative Maintenance)
• Install new tire.
• Balance assembly.
• Reinstall wheel on vehicle.

Includes:

• Remove wheel from vehicle.
• Remove old tire.
• Remove, Clean and Inspect Tube.
• Clean wheel (Provided it is not completely covered in caked on road grime).
• Grease wheel bearings & seals (Preventative Maintenance)
• Install new tire.
• Balance assembly.
• Reinstall wheel on vehicle.

Engine/Transmission oil and oil filter change.
Includes Maxima Premium 4-Stroke oil and oil filter.

This applies to most bikes. It includes the following:

• Engine/Transmission oil change
• Lube and adjust cables
• Lube and adjust chain
• Inspect/Clean air filter
• Set air pressure in tires
• Complete multi-point inspect/lube/adjust

Includes Maxima Premium 4 Stroke Oil and oil filter.

This applies to most street bikes. It includes the following:

• Engine and transmission oil change
• Lube and adjust cables
• Lube and adjust chain
• Inspect/Clean air filter
• Cooling system flush
• Flush front and rear brake systems
• Set tire pressures
• Complete multi-point inspect/lube/adjust

This applies to most street bikes. It includes the following:

• Engine and transmission oil change
• Compression test (New plugs installed at no additional labor cost if requested or needed)
• Valve adjustment
• Throttle body cleaning and service
• Lube and adjust cables
• Lube and adjust chain
• Inspect/Clean air filter
• Cooling system flush
• Flush front and rear braking systems
• Set air pressure in tires
• Complete multi-point inspect/lube/adjust

Includes Maxima Premium 4 Stroke Oil and oil filter.

Complete disassembly to componant level, cleaning all surfaces, clearing all passages, installing new jets, and replacement of any neccessary parts. If neccessary, carbs are cleaned in an ultrasonic tank. Includes carburetor synchronization.
Price is for a common inline-4 sport bike.

Complete disassembly to componant level, cleaning all surfaces, clearing all passages, installing new jets, and replacement of any neccessary parts. If neccessary, carbs are cleaned in an ultrasonic tank.

Shim-Under-Bucket type valve adjustment, single or twin cam.

Disassembly and inspection of forks and replacement of oil, oil seals and dust seals.
Here at PowerSports ER, we take great pride in performing the absolute best quality fork rebuild possible!
Your forks have never been in such good hands!

Disassembly and inspection of forks and replacement of oil, oil seals and dust seals.
Here at PowerSports ER, we take great pride in performing the absolute best quality fork rebuild possible!
Your forks have never been in such good hands!
Every fork rebuild includes a thorough inspection of the inner tube outer surface for nicks and scratches.
If found, we buff and polish the tube to insure that your fork oil seals last as long as possible!

Includes disassembly of shock, cleaning of componants and filling with oil.

Includes complete disassembly of shock, cleaning of componants, replacing all wear items and filling with oil.

Includes cutting old spokes, installation of new spokes and truing of rim to hub.
$25 extra if you want to keep your old spokes as they will have to be removed one by one instead of cut

Includes truing of one wheel.

Includes replacement of front and rear sprockets and chain.

Includes replacing the brake pads in one caliper and bleeding system. Price includes DOT 4 Brake Fluid.

Includes replacing wheel bearings $ seals in one wheel.

This includes things such as:

• Switch troubleshooting
• Switch rewiring
• Charging system diagnostics
• Lights troubleshooting (Unless it's just a bad bulb)
• Brake light switch diagnostics
• Switch replacement (If wire splicing is needed)
• Instruments/Gauges troubleshooting
• Installation of aftermarket electrical accessories

Price does not include parts. Black or colored rims are not an issue, we take pride in executing every tire change to perfection.

Price does not include parts. Black or colored rims are not an issue, we take pride in executing every tire change to perfection.

Includes Maxima Premium 4 Stroke oil and oil filter.

This applies to all two-stroke dirt bikes. It includes the following:

• Transmission oil change
• Compression test (New plug installed at no additional labor cost if requested)
• Lube and adjust cables
• Lube and adjust chain
• Clean and oil air filter
• Set tire pressures
• Complete multi-point inspect/lube/adjust

Includes Maxima Premium 4 Stroke oil and oil filter.

This applies to all two-stroke dirt bikes. It includes the following:

• Transmission oil change
• Compression test (New plug installed at no additional labor cost if requested)
• Lube and adjust cables
• Lube and adjust chain
• Clean and oil air filter
• Cooling system flush
• Flush front and rear brake systems
• Set tire pressures
• Complete multi-point inspect/lube/adjust

Complete disassembly to componant level, cleaning all surfaces, clearing all passages, installing new jets, and replacement of any neccessary parts.

Includes Maxima Premium 4 Stroke oil and oil filter.

This applies to all four-stroke dirt bikes. It includes the following:

• Engine/Transmission oil change
• Lube and adjust cables
• Lube and adjust chain
• Clean and oil air filter
• Set air pressure in tires
• Complete multi-point inspect/lube/adjust

Includes Maxima Premium 4 Stroke oil and oil filter.

This applies to all four-stroke dirt bikes. It includes the following:

• Engine and transmission oil change
• Compression test and clean spark plug (New plug installed at no additional labor cost if requested
• Lube and adjust cables
• Lube and adjust chain
• Clean and oil air filter
• Cooling system flush
• Flush front and rear braking systems
• Set tire pressures
• Complete multi-point inspect/lube/adjust

Includes Maxima Premium 4 Stroke oil and oil filter.

This applies to all four-stroke dirt bikes. It includes the following:

• Engine and transmission oil change
• Compression test and change spark plug
• Valve adjustment
• Lube and adjust cables
• Lube and adjust chain
• Clean and oil air filter
• Cooling system flush
• Flush front and rear braking systems
• Set air pressure in tires
• Complete multi-point inspect/lube/adjust

Complete disassembly to componant level, cleaning all surfaces, clearing all passages, installing new jets, tuning accelerator pump timing, and replacement of any neccessary parts.

Shim-Under-Bucket type valve adjustment, single or twin cam.

Includes replacement of clutch plates and an oil change.

Disassembly of forks and replacement of oil and dust seals.

Disassembly of outer chamber only and replacement of oil and dust seals.
Inner chamber oil is not changed.

Disassembly and inspection of inner and outer chambers, replacement of bushings and oil and dust seals.

Includes complete disassembly of shock, cleaning of componants, replacing all wear items and filling with oil.

Includes cutting old spokes, installation of new spokes and truing of rim to hub.

Includes truing of one wheel.

Includes replacement of front and rear sprockets and chain.

Includes replacing the brake pads in one caliper and bleeding system. Price includes DOT 4 brake fluid.

Includes replacing wheel bearings $ seals in one wheel.

This includes things such as:

• Switch troubleshooting
• Switch rewiring
• Charging system diagnostics
• Lights troubleshooting (Unless it's just a bad bulb)
• Brake light switch diagnostics
• Switch replacement (If wire splicing is needed)
• Instruments/Gauges troubleshooting
• Installation of aftermarket electrical accessories

Includes dismount and mount of one tire/wheel.

Includes dismount and mount of one tire/wheel.

Engine/Transmission oil and filter change.
Price includes Maxima Premium 4 Stroke oil and oil filter.

This applies to most ATVs. It includes the following:

• Engine/Transmission oil change
• Lube and adjust cables
• Lube and adjust chain (Drain and replace differential gear oil on shaft driven ATV's).
  Front differential $15 extra on 4x4 ATV's.
• Clean and oil air filter
• Set tire pressures
• Complete multi-point inspect/lube/adjust

Includes Maxima Premium 4 Stroke oil and oil filter. (Includes Bel-Ray Hypoid Gear Oil for differentials)

This applies to most ATVs. It includes the following:

• Engine and transmission oil change
• Compression test and change spark plug
• Lube and adjust cables
• Lube and adjust chain (Drain and replace differential gear oil on shaft driven ATV's).
  Front differential $15 extra on 4x4 ATV's.
• Clean and oil air filter
• Cooling system flush
• Flush front and rear braking systems
• Set tire pressures
• Complete multi-point inspect/lube/adjust

Includes Maxima Premium 4 Stroke oil and oil filter. (Includes Bel-Ray Hypoid Gear Oil for differentials)

This applies to most ATVs. It includes the following:

• Engine and transmission oil change
• Compression test and change spark plug
• Valve adjustment
• Lube and adjust cables
• Lube and adjust chain (Drain and replace differential gear oil on shaft driven ATV's).
  Front differential $15 extra on 4x4 ATV's.
• Clean and oil air filter
• Cooling system flush
• Flush front and rear braking systems
• Set tire pressures
• Complete multi-point inspect/lube/adjust

Complete disassembly to componant level, cleaning all surfaces, clearing all passages, installing new jets, tuning accelerator pump timing, and replacement of any neccessary parts.

Screw and locknut type valve adjustment or Shim-Under-Bucket type valve adjustment, single or twin cam.

Includes disassembly of shock, cleaning of componants and filling with oil.
Price includes Maxima Racing shock oil.
Price is per shock.

Includes complete disassembly of shock, cleaning of componants, replacing all wear items and filling with oil.
Price includes Maxima Racing shock oil.
Price is per shock.

Includes replacement of front and rear sprockets and chain.

Includes replacing the brake pads in one caliper and bleeding system.

Includes removal of wheel and brake drum assembly, replaceing brake shoes and bleading system.

Includes replacement of clutch plates and an oil change.

This includes things such as:

• Switch troubleshooting
• Switch rewiring
• Charging system diagnostics
• Lights troubleshooting (Unless it's just a bad bulb)
• Brake light switch diagnostics
• Switch replacement (If wire splicing is needed)
• Instruments/Gauges troubleshooting
• Installation of aftermarket electrical accessories

Engine/Transmission oil and filter change.
Includes Maxima Premium 4 Stroke oil and oil filter.

This applies to most UTVs (Side by Sides). It includes the following:

• Engine/Transmission oil change
• Differential gear oil change
• Lube and adjust cables
• Clean and oil air filter
• Cooling system flush
• Flush front and rear braking systems
• Set tire pressures
• Complete multi-point inspect/lube/adjust

Includes Maxima Premium 4 Stroke oil and oil filter.

This includes things such as:

• Switch troubleshooting
• Switch rewiring
• Charging system diagnostics
• Lights troubleshooting (Unless it's just a bad bulb)
• Brake light switch diagnostics
• Switch replacement (If wire splicing is needed)
• Instruments/Gauges troubleshooting
• Installation of aftermarket electrical accessories

It includes the following:

• Add fuel stabilizer and run PWC to operating temp to distribute fuel stabilizer through entire fuel system
• Change engine oil and filter if requested +$65
• Run 1 gallon of antifreeze through cooling system to prevent freeze damage
• Remove spark plugs and fog cylinders
• Coat metal parts with anticorrosion spray (Fluid Film, Corrosion-X)
• Clean PWC

Includes 4qts marine oil and oil filter.

This applies to all four-stroke personal watercraft. It includes the following:

• Change engine oil and oil filter
• Inspect and change air filter (if applicable)
• Charge/test battery and charging system
• Compression test (Install new spark plugs if needed)
• Lube and adjust all cables
• Inspect pump body, intake grate and wear ring
• Inspect impeller blades for damage and wear
• Inspect exhaust system for leaks
• Lube throttle body
• Grease zerk fittings on prop/drive shaft
• Inspect fuel system
• Test run and set idle
• Complete multi-point inspection

It includes the following:

• Charge/test battery and charging system
• Compression test and change spark plugs
• Lube and adjust all cables
• Inspect and adjust 2 stroke oil injection system
• Inspect pump body, intake grate and wear ring
• Inspect impeller blades for damage and wear
• Inspect exhaust system for leaks
• Grease zerk fittings on prop/drive shaft
• Inspect fuel system and clean sediment bowl/fuel filter
• Test run and set idle
• Complete multi-point inspection

It includes the following:

• Charge/test battery and charging system
• Compression test and change spark plugs
• Lube and adjust all cables
• Inspect and adjust 2 stroke oil injection system
• Inspect pump body, intake grate and wear ring
• Inspect impeller blades for damage and wear
• Inspect exhaust system for leaks
• Grease zerk fittings on prop/drive shaft
• Inspect fuel system and clean sediment bowl/fuel filter
• Test run and set idle
• Complete multi-point inspection

This applies to all two-stroke stand up jet skis. It includes the following:

• Charge/test battery and charging system
• Compression test and change spark plugs
• Inspect and adjust oil injection
• Lube and adjust all cables
• Inspect pump body, intake grate and wear ring
• Inspect impeller blades for damage and wear
• Inspect exhaust system for leaks
• Grease zerk fittings
• Inspect fuel system and clean sediment bowl/fuel filter
• Test run and set idle
• Complete multi-point inspection

Includes removal of carb from ski, complete disassembly of carburetor down to component level, cleaning of all components and carburetor body inside and out, all passages cleared, replacement of all wear items (Diaphrams, gaskets, jets etc), pop-off pressure test, and reassembly.

Includes removal of carbs from ski, complete disassembly of carburetors down to component level, cleaning of all components and carburetor body inside and out, all passages cleared, replacement of all wear items (Diaphrams, gaskets, jets etc), pop-off pressure test, and reassembly.

Includes removal of carbs from ski, complete disassembly of carburetors down to component level, cleaning of all components and carburetor body inside and out, all passages cleared, replacement of all wear items (Diaphrams, gaskets, jets etc), pop-off pressure test, and reassembly.

Includes removal and installation of the pump, inspection of the driveshaft, prop repair or replacement, and inspection of pump shaft, bearings and seals.

Includes removal and installation of pump, inspection of prop/drive shaft, prop repair or replacement, and inspection of pump shaft, bearings and seals.

This is for a mid to rear mounted 2 stroke engine only. Front mounted is extra. This includes labor to remove engine, install peripheral components on new/remanufactured engine, reinstall engine and 2hr Test, Tune & Break-In new engine On Water.
NOTE: If engine must be disassembled to determine cause of failure, there will be an additional charge of $275. This includes disassembly, component inspection and reassembly prior to core return shipment.

This applies to most 4 stroke engines but not all. This includes labor to remove engine, install peripheral components on new/remanufactured engine, reinstall engine and 2hr Test, Tune & Break-In new engine On Water.
NOTE: If engine must be disassembled to determine cause of failure, there will be an additional charge of $349. This includes disassembly, component inspection and reassembly prior to core return shipment.

This includes diagnostics to determine cause of failure, removal, precision measurement to determine usability of cylinders, boring & honing cylinders (If applicable), reinstallation of components & 2hr Test, Tune & Break-In new engine On Water

This includes diagnostics to determine cause of failure, removal, precision measurement to determine usability of cylinders, boring & honing cylinders (If applicable), reinstallation of components & 2hr Test, Tune & Break-In new engine On Water.

This includes things such as:

• Switch troubleshooting
• Switch rewiring
• Charging system diagnostics
• Lights troubleshooting (Unless it's just a bad bulb)
• Brake light switch diagnostics
• Switch replacement (If wire splicing is needed)
• Instruments/Gauges troubleshooting
• Installation of aftermarket electrical accessories